Common layer
Rider, route, and motion
Phone GPS and motion sensors, optional Apple Watch measurements, ride timing, and derived jump events follow the rider across both supported bike systems.
Every Studio signal
Read the ride in layers.
Speed, cadence, rider and motor power, battery percentage, and odometer can be shared across supported systems. Energy in watt-hours, temperatures, bike range, assist modes, and detailed status are bike-specific and appear only when reported. OpenLevo never manufactures a missing channel.
Specialized · TCX
Deeper bike channels
Turbo Levo can add controller, energy, thermal, ownership, security, and supported tuning context when its controller and firmware expose them.
Bosch · LDI
Official read-only telemetry
Smart System supplies its published live channels for speed, cadence, rider and motor power, battery, odometer, and system status. OpenLevo does not write Bosch settings.
Rider
The human inside the machine.
RIDER POWER248 W
Bike
The rider-power channel reported by the bike: useful for seeing where you worked, not a complete measure of physiological load.
Private by default. Unavailable when the bike does not report it.RIDER + MOTOR35 % rider
Calculated from bike measurements
Your share of combined rider and motor power at that moment. It shows the partnership without judging the effort.
Private by default. Requires both rider- and motor-power channels.CADENCE82 rpm
Bike
Crank revolutions per minute. Pair it with power to see how a climb was ridden, not simply how fast the bike moved.
Unavailable when cadence is not reported.HEART RATE154 bpm
Health
Measured heart rate from an allowed health source, synchronized to the film only when the rider chooses to include it.
Private by default. Never inferred from the footage.Bike
What each bike reports.
SPEED18.4 mph
Bike
Bike-reported speed where the channel is available, kept distinct from phone GPS speed.
Units follow the project setting.MOTOR POWER412 W
Bike
The bike’s reported motor-power channel, revealing when assistance builds, settles, or responds to rider input.
The exact channel depends on bike support.BATTERY78 %
Bike
Battery state of charge reported by the bike—a familiar percentage for the arc of the ride.
A stale stream is marked stale rather than frozen.ENERGY REMAINING536 Wh
Bike
Remaining energy in watt-hours when the bike exposes that channel. It is not fabricated from battery percentage.
May be unavailable on some bike and firmware combinations.ASSIST MODETRAIL
Bike
The reported mode state—such as Eco, Trail, Turbo, eMTB, Tour+, or another recognized mode—giving context to power and battery changes.
Shown only when a recognized mode is reported.MOTOR TEMP131 °F
Bike
The motor's own reported temperature — the story of a long climb told in heat, journaled for the whole ride.
Unavailable when the bike does not report it.BATTERY TEMP84 °F
Bike
Measured pack temperature. It feeds the range model directly — a cold battery honestly costs range.
Unavailable when the bike does not report it.BIKE RANGE18/34 mi
Bike
The bike's own short and long range estimates, shown as their own rows and never blended into OpenLevo's model.
Availability varies by controller and firmware.ODOMETER1,284 mi
Bike
Lifetime distance the bike has actually rolled — the figure that drives Garage totals and service intervals.
GPS totals stay labeled "ridden with OpenLevo."Trail + time
The shape and rhythm of the route.
ELEVATION1,284 ft
Phone GPS
Altitude from the recorded phone route. It can reveal the profile of a climb, with normal GPS variation.
Precise route use is opt-in for export.GRADE−7.2 %
Derived
Change in GPS elevation over ground distance. It is useful as a trend and can be noisy over short intervals.
Derived from accepted route fixes; smoothing may be applied.DISTANCE0.2 mi
Phone GPS
Distance accumulated from accepted phone GPS fixes, synchronized to the point shown in the film.
Units follow the project setting.ELAPSED TIME00:07
Derived
The synchronized ride clock at the playhead, connecting a video moment to its place in the recorded ride.
Calculated from project and ride timing.CONSUMPTION12.4 Wh/mi
Bike
Energy per distance as the ride actually burned it — the number that turns battery percent anxiety into arithmetic.
Journaled when the bike reports it.Honest by design
A blank can be more truthful than a number.
OpenLevo carries the source and state of telemetry through import, preview, and export. That protects the meaning of the ride.
The source stays attached.
Bike, phone GPS, Watch GPS and barometer, chosen health measurements, and imported recorders like a Garmin remain distinguishable from calculated values — each labeled with its source.
Old data does not impersonate live data.
If a stream drops, the editor can mark it stale instead of holding the last number as though it were current.
Missing stays missing.
Unsupported or absent channels remain unavailable. OpenLevo does not infer telemetry from video pixels.
The rider chooses what leaves the Mac.
Precise route, heart rate, and rider power require explicit inclusion. Studio edits and source files stay local.
Make the data part of the story